Canine Brucella canis Antibody Test
Model No:VD017Q
Abbr.:C Brucella Ab
Assay Time:5-10 minutes
Specimen:serum,plasma or whole blood
Description
Specification
Calculator Kit C Brucella Ab Test
Propose: for the qualitative detection of the Brucella canis Antibody(C.BRU Ab).
Principle: lateral flow immunochromatographic assay.
Specimen: serum, plasma or whole blood
Materials provided:
Special Features:
1.Two detection methods are available, allowing for the selection of the appropriate method based on the requirements.
2.Combining products with instruments can yield more refined detection results, enhancing efficiency and convenience.
3.Facilitates data recording, trend analysis, and report generation, aiding users in data management and decision-making.
Test Procedures & Interpretation
1. Direct Use
Test Procedures
1.Take out the test card from the foil pouch and place it horizontally onto a worktable.
2.Collect 20μL of the prepared specimen into a vial of assay buffer and mix well. Then use another pipette tip to drop 3 drops (approx. 90μL) of the diluted sample into the sample well "S" of the test card.
3.Waiting for 5 to 10 minutes to interpret the test result.
Interpretation of Results
Positive (+): The presence of both "C" line and zone "T" line, no matter T line is clear or vague.
Negative(-): Only clear C line appear. No T line.
Invalid: No colored line appears in C zone. No matter if T line appears.
2. Applied to FIC-Q100N
Test Procedures
1.Turn on the FIC-Q100N dry immunoassay analyzer and and check the status.
2.Use the scanner that comes with the analyzer to scan the QR code inside the box to apply the calibration curve into the analyzer.
3.Take out the test card from the foil pouch and insert it into the test card slot of the analyzer. Keep the specimen well of the test card facing up and leave the specimen well outside.
4.Use the pipette to place 20μL of the prepared specimen into a vial of assay buffer and mix well. Replace an another pipette tip, and drop 3 drops (approx. 90μL) of the diluted sample into the sample well "S" of the test card.Then insert it into the bottom of the test card slot.
5.Press [STANDARD TEST] on the screen to start the testing. Result would be displayed on the screen in 10 minutes. In the case of direct use way, [Quick test] could also be applied if using a timer to record the time. *Results read by the Dry Immunoassay Analyzer.
|
Symbol |
Result |
Interpretation |
|
- |
Negative |
Unlikely Brucella infection. |
|
+/- |
Suspicious |
Could not be determined. It is suggested to repeat the test with once another sampling. |
|
+ |
Weak positive |
Low antibody titer, in the stage of current infection or previous infection. |
|
++ |
Positive |
Medium antibody titer, in the stage of current infection or previous infection. |
|
+++ |
Strong positive |
High antibody titer, in the stage of current infection or previous infection. |
Order Information
| Product No. | Product Name | Storage Temperature | Package Unit |
|
VD017Q |
Canine Brucella canis Antibody Test |
2-30℃ |
10 Tests/Kit |
